||Cleaners and Rust Preventatives
General Purpose Cleaners
- Green Thunder
Alkaline cleaner for machine degreasing, floor cleaning & most shop cleaning applications. USDA Approved.
- Orange Peel
Citrus type cleaner for machine degreasing, floor cleaning & most shop cleaning applications.
- Vesta Power
Alkaline cleaner for machine degreasing, floor cleaning & most shop cleaning applications. Non-combustible degreaser for greasy, oily soils on hard surfaces.
Spray/ immersion alkaline cleaner for multi-metal applications. Oil rejecting. Do not use when in process R/P is needed. Heavy-medium shop soil load removal. 120F to 160 F Temp.
- PDR 0001
Spray alkaline cleaner with some solvency. Multi-metal use (check aluminum alloys). Heavy to light soil load removal. Oil rejecting with no in-process R/P. 120F to 170F
Neutral pH rust remover for ferrous and brightener for other metals. Consult your Rep for concentration ranges.
- Tech Clean 7011
Alkaline cleaner for cleaning of coolant systems. Safe on all metals. Environmental and operator friendly.
- Tech Clean 7022CSI
Spray alkaline cleaner that is non-staining for multi-metal applications. Oil rejecting. Limited in-process R/P. Medium to light soil load removal. 120F to 160F Temp.
- Tech Solv 334
Non-chlorinated solvent cleaner, flash point 147F.
Cleaners with Rust Prevention
- GeoGuard 4017
Spray carbonate combination cleaner/rust preventative. Oil rejecting. Very good in-process R/P. Ferrous metals only. Medium to light soil load removal. Ambient to 170F Temp. No nitrites.
- GeoGuard 4021
Non-nitrite, cleaner and rust and corrosion inhibitor for steel and aluminum parts. Up to 90 days protection in-doors.
- Tech Clean 7610
Spray alkaline combination cleaner/rust preventative. Oil rejecting. For ferrous and non-ferrous metals. Nonphosphated and biodegradable. Good in-process rust protection. Light to Medium shop soil load removal. Ambient to 160F Temp.
- ProTech 1300
Solvent based R/P leaves thin oily film and long-term indoor protection of up to 18 months. 142F flash point, water displacing, and all metal safe. Use at 100% concentration.
- ProTech 1350
Solvent based, fast-drying R/P leaves thin easily removed oily film and medium-term indoor protection up to 12 months. 142F flash point, water displacing, and all metal safe. Use at 100% concentration.
- ProTexo 1125
Unique ready-to-use polymer based R/P for steel. Neutral pH and low VOC. Consult Nalco Rep for concentration ranges. Up to 2 years indoor protection.