|
Kocour Laboratory Equipment
Stalagmometers & Tensiometers
| Catalog Number |
Model |
For |
Description |
| 0-75-920 |
Stalagmometer |
Nickel, Acid Copper, Acid Zinc, Acid Dips, Pickles (5ML) |
Surface tension, for control of wetting agents |
| 0-75-922 |
Stalagmometer |
Chromium (2.5 ML) |
Surface tension, for control of wetting agents |
| 0-75-921 |
Stalagmometer Kit (includes: stand, filler bulb, beaker and counter) |
Nickel, Acid Copper, Acid Zinc, Acid Dips |
Surface tension, for control of wetting agents |
| 0-75-924 |
Stalagmometer Kit |
Chromium |
Surface Tension |
| 0-75-930 |
Tensiometer Manual Model 20 |
Application of torsion to raise ring and simultaneous lowering of sample table are performed manually |
NA |
| 0-75-931 |
Tensiometer Manual Model 21 |
A reversible synchronous motor is used to provide smooth uniform raising and lowering of test ring and sample table. Prevents premature ring breakaway from liquid. |
NA |
| 0-75-932 |
|
Replacement platinum-iridium ring. |
NA |
| 0-75-933 |
|
Calibration weight set for above contains 4 weights (100 mg, 200 mg, 500 mg and 1 gram), and Certificate of Traceability. |
NA |
| 0-75-025 |
Accessory Kit |
|
|
Hydrometers & Thermometers
| Catalog Number |
Model |
Description |
| 0-75-911 |
Baume' Hydrometer, 0-35 BE |
Double scale reads in BE' and specific gravity 1.000-1.350 12 inches long. |
| 0-75-912 |
Baume' Hydrometer, 0-70 BE |
Double scale reads in BE' and specific gravity 1.000-2.000 12 inches long |
| 0-75-913 |
Special AC Hydrometer |
Direct reading hydrometer for iron free acid copper solutions. Range 18-53 oz/gal. Used with Analytical Set Model Ac-2 |
| 0-75-916 |
Pocket Thermometer (with case) |
Range 0-220 F., 6 inches long. |
| 0-75-917 |
Dial Thermometer, Stainless Steel |
Range 50-300F. 8 inch stem |
| 0-75-918 |
Chrometer |
Reads 15-55 oz./gal. Chromic acid |
| 0-75-914 |
Plater's Floating Thermometer |
Double Scale reads 0-220 F and 20-110 C 12 inches long |
| 0-75-911C |
Baume' Hydrometer 0-35 BE |
Accuracy (+ or -) 1% |
| 0-75-912C |
Baume' Hydrometer 0-70 Be |
Accuracy (+ or -) 1% |
Timers
| Model |
Description |
| 173 |
GRALAB 15 hours, by hours, minutes and 1/4 minutes |
| 170 |
GRALAB 60 hours, by hours and minutes |
| 171 |
GRALAB 60 minutes, by minutes and seconds |
| 172 |
GRALAB 15 minutes, by minutes, seconds and 1/4 seconds |
Deposit Stress Analyzer
| Model |
Description |
| 683EC |
Specialty Development Rapid measurement of stress in plated deposits |
|
|
