(800) 432-8692 | (305) 681-8531

9000-HF and 9000-HF-SY, Horizontal Disc Filtration System Rubber Lined

$19,729.00

Pump Options *

Slurry Tank option *

Specify System Parameters *

SKU: 9000-HF Category:

Description

Parameter Model # 9000
Filtering Capacity 9000 GPH
Open Pumping Capacity 13000 GPH
Filtration Surface Area (ft2) 89 sq. ft.
Number of Filter Media 50 pcs of 19" dia Media
Sludge Holding Capacity (ft3) 2.11 Cubic Ft
Approx Dimension (in) 44" long x 36" wide x 59" high no slurry tank
59" long x 44" wide x 59" high with slurry tank
Approx (Crated) Net Weight (lbs) 1140 lbs no slurry tank
1280lbs with slurry tank
Hose Connections 3" NPT (Female) Suction and 2.0" (Female) Discharge
Motor* 5 HP TEFC

Note: FYBROC Series 1530 Fiberglass Pump is Standard, Contact us for Magnetic Drive Pump Options


FEATURES & BENEFITS:


Flow rate 9,000 GPH
-Horizontal disc technology
-Maximum surface area (1 sq. ft. per 100 GPH!)
-Large sludge holding capacity
-Superior corrosion resistance
-FRP pump with choice of mechanical seals
-Temperature to 190°F (90°C)
-Low disposal cost
-Choice of cellulose, carbon/cellulose or reusable polypropylene filter media
-Powder coated steel frame with casters for easy handling
-NEMA 4 water tight, corrosion resistant starter
-Mechanical cover lifting device for easy access to filter pack
-Bottom plate and lifting rod for quick change of disc stack standard (optional for 4500)


SPECIFICATIONS:
Filter
Filter chambers are constructed of mild steel with hard rubber lining (3 mm) on the interior and corrosion resistant paint (2 coats) on the exterior. A flanged tangential inlet is standard, along with a bottom outlet and drain. Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. The lifting device provides for mechanical movement of the cover for maintenance purposes. An air release valve positioned on the cover, is also used as the return line during pre-coating. A pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard. Filter media suited for the application is placed between the rigid polypropylene filter discs. Filter media of various materials and micron ratings are available. Ten (10) micron cellulose is standard. All systems are mounted on a powder coated structural steel frame with casters for easy handling.



Pump
Model 9000-HF through 30000-HFD
Fybroc fiberglass centrifugal pumps are standard. Mechanical seal options are single CRS-35/B with silicon carbide faces or double waterflush.


Slurry Tank
Slurry tanks are mild steel construction with an interior of hard rubber (3 mm) and an exterior of corrosion resistant paint (2 coats). They are used to facilitate pre-coating and addition of activated carbon (if required), as well as solution make-up and priming of the pump. The slurry tank can also be used to store solution from the fitter chamber during changing of media or maintenance. Pre-coating provides superior filtration and extends the life of the filter media.



Piping, Valves and Connections
Piping, valves, and connections are all CPVC construction. Suction of the pump is piped to permit flow from the solution tank, slurry tank, and the filter chamber.


X-Construction (Contact Us for additional price adder)
X-construction is used for more aggressive solutions such as acid copper, acid zinc, and acid tin. The filter chamber and slurry tank are outside rubber lined, the base and cover are powder coated and the pump shaft is titanium.


VD Lid assembly (15000/30000 standard, 9000 optional)
VD Lid assembly is used to tighten down the disc stack versus the cover.


WE ALSO CARRY ALL MEFIAG SPARE PARTS AND FILTER PAPER / MEDIA


Click Here to Download:
DATA SHEET


 


Note: All Filter units will have to ship by freight

Reviews

There are no reviews yet.

Be the first to review “9000-HF and 9000-HF-SY, Horizontal Disc Filtration System Rubber Lined”

Your email address will not be published. Required fields are marked *