General Purpose Cleaners
Alkaline cleaner for machine degreasing, floor cleaning & most shop cleaning applications. USDA Approved.
Citrus type cleaner for machine degreasing, floor cleaning & most shop cleaning applications.
Alkaline cleaner for machine degreasing, floor cleaning & most shop cleaning applications. Non-combustible degreaser for greasy, oily soils on hard surfaces.
Spray/ immersion alkaline cleaner for multi-metal applications. Oil rejecting. Do not use when in process R/P is needed. Heavy-medium shop soil load removal. 120F to 160 F Temp.
Spray alkaline cleaner with some solvency. Multi-metal use (check aluminum alloys). Heavy to light soil load removal. Oil rejecting with no in-process R/P. 120F to 170F
Neutral pH rust remover for ferrous and brightener for other metals. Consult your Rep for concentration ranges.
Tech Clean 7011
Alkaline cleaner for cleaning of coolant systems. Safe on all metals. Environmental and operator friendly.
Tech Clean 7022CSI
Spray alkaline cleaner that is non-staining for multi-metal applications. Oil rejecting. Limited in-process R/P. Medium to light soil load removal. 120F to 160F Temp.
Tech Solv 334
Non-chlorinated solvent cleaner, flash point 147F.
Cleaners with Rust Prevention
Spray carbonate combination cleaner/rust preventative. Oil rejecting. Very good in-process R/P. Ferrous metals only. Medium to light soil load removal. Ambient to 170F Temp. No nitrites.
Non-nitrite, cleaner and rust and corrosion inhibitor for steel and aluminum parts. Up to 90 days protection in-doors.
Tech Clean 7610
Spray alkaline combination cleaner/rust preventative. Oil rejecting. For ferrous and non-ferrous metals. Nonphosphated and biodegradable. Good in-process rust protection. Light to Medium shop soil load removal. Ambient to 160F Temp.
Solvent based R/P leaves thin oily film and long-term indoor protection of up to 18 months. 142F flash point, water displacing, and all metal safe. Use at 100% concentration.
Solvent based, fast-drying R/P leaves thin easily removed oily film and medium-term indoor protection up to 12 months. 142F flash point, water displacing, and all metal safe. Use at 100% concentration.
Unique ready-to-use polymer based R/P for steel. Neutral pH and low VOC. Consult Nalco Rep for concentration ranges. Up to 2 years indoor protection.