(800) 432-8692 | (305) 681-8531

Rapid Power



Product Description

Some of the most advanced features include:

  • Totally Sealed Operation
  • Soft Switching Power
  • Converter Technology
  • Digital/Microprocessor Controlled
  • Standard Computer Interface Control


  • Reverse polarity
  • Ampere Hour meters
  • Rack mount
  • Remote control

Rapid Power offers the latest generation of fully sealed, high frequency switchmode DC power supplies. Rapid’s switchmode power supplies feature innovative design and fabrication techniques, providing users with a significant cost and performance advantage. The sleek styling and distinctive appearance blend technology and functionality into a user-friendly, precision output, high-tech package.


Rapid’s switchmode power supply has been designed to be extremely simple to operate and maintain. All output adjustments are made from the control keypad located in the front panel of the unit. Also included on the front panel are:

  • Power on/off switch
  • Voltage and Current setpoint selection push buttons
  • Up/Down setpoint control push buttons
  • Voltage and Current mode indicating lights
  • Alphanumeric display for Voltage and Current setpoints


The power supply features a fault diagnostic protection system to automatically shut down the unit in the unlikely event a fault condition exists. If a fault is detected, the microprocessor first verifies the fault, and attempts to correct the condition. If the fault persists, the power supply will shut down and provide a fault message on the alphanumeric display. The fault detection system protects critical components of the power supply from the following conditions:

  • Input AC line over and under-voltage
  • Output DC over-voltage
  • Output overcurrent (automatic reset)
  • Overtemperature



Input Voltage: 100 to 125 Volts AC 50/60 Hz, 1 ph

Output Voltage & Current:

  • 0-10 A., 6,12,V DC
  • 0-25 A., 6,12 V DC
  • 0-50 A., 6,12 V DC
  • 0-100 A., 6,12 V DC

Input Voltage: 190 to 250 Volts AC 50/60 Hz, 1. ph.

Output Voltage& Current:

  • 0 – 200 A., 6, 12, 15 V DC
  • 0 – 300 A., 6, 12 V DC
  • (Other currents and voltages available)

Output Voltage Regulation: ± .5% from 10-100% of full range of output

Output Current Regulation: ± .5% from 10-100% of full range of output

Operating Temperature: 0 C to 40 C (32 F to 104 F)

Load Side Fault Protection:

  • Short Ciruit protected
  • Open Circuit protected
  • Load over-voltage shut down
  • Load over-current shut down

Line Side Protection: Over/under-voltage shut down


  • Output to chassis:
  • 500 VAC (1 minute)
  • Output to input AC line:
  • 2000 VAC (1 minute)

Output Ripple: .5 % RMS. From 0 to full load

System Protection: Over-temperature shut down

Sealing: Air-tight gasket seal

Dimensions: 5.25″ h x 19″ x 20″ d,

Stand Alone or rack mountable

Weight: Approximately 30 lb