(800) 432-8692 | (305) 681-8531

FLO KING BX5000, 5000 GPH, CPVC Construction

SKU: N/A Category:


BX5000 Filter System

The BX5000 provides a maximum flow rate of 5000 gallons (19,000 liters) per hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (8, 10, 12, 14, 16, 18 and 20″) enable use of the BX5000 in tanks with varying solution levels and depths.

The BX5000 comes complete, preassembled, ready to operate and includes the items shown in the labeled photo (right). For best results in most metal finishing solutions, use the BX5000 with our Permacore Magnum (PMCA) reusable or FK50 Poly-Spun Disposable filter cartridges in the appropriate length.

BX5000 Specifications

Pump: All-CPVC or polypropylene construction with Teflon-covered stainless steel shaft. Pump also available in stainless steel and PVDF (Kynar).

Flow Rate: 5000 gallons (19,000 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz.

Pressure: 27 feet (8.2 meters) of head pressure.

Weight: About 29 pounds (13 kg), depending on pump body length

Motor: Epoxy coated, TEFC, Thermally Protected. Available in single phase, 3/4 HP (560 watt), 120/240 V, 11/5.5 A, 50/60 Hz, 2850/3450 RPM; or three phase, 1 HP (760 watt), 230/460 V, 3.0/1.5 A, 60 Hz, 3450 RPM. (Note: There is an additional charge for three-phase motors).

Important: To ensure priming and proper operation of BX5000, solution should be 4″ (10 cm) or more above Weep Hole on pump body. Specify length of pump body when ordering.

BX5000 Dimensions

“A” Dimension
8-3/4″ (22 cm)
10-3/4″ (27 cm)
12-3/4″ (32 cm)
14-3/4″ (37 cm)
16-3/4″ (43 cm)
18-3/4″ (48 cm)
20-3/4″ (53 cm)

Additional information

Weight N/A


There are no reviews yet.

Be the first to review “FLO KING BX5000, 5000 GPH, CPVC Construction”

Your email address will not be published. Required fields are marked *