|Parameter||Model # 15000|
|Filtering Capacity||15,000 GPH|
|Open Pumping Capacity||18,000 GPH|
|Filtration Surface Area (ft2)||150 sq. ft.|
|Number of Filter Media||60 pcs of 22" dia Media|
|Sludge Holding Capacity (ft3)||3.0 Cubic Ft|
|Approx Dimension (in)||44" long x 36" wide x 79" high no slurry tank
59" long x 44" wide x 79" high with slurry tank
|Approx (Crated) Net Weight (lbs)||1100 lbs no slurry tank
1300 lbs with slurry tank
|Hose Connections||3" NPT (Female) Suction and 3" (Female) Discharge|
|Motor*||10 HP TEFC|
Note: FYBROC Series 1530 Fiberglass Pump is Standard, Contact us for Magnetic Drive Pump Options
FEATURES & BENEFITS:
–Flow rate 15,000 GPH
-Horizontal disc technology
-Maximum surface area (1 sq. ft. per 100 GPH!)
-Large sludge holding capacity
-Superior corrosion resistance
-FRP pump with choice of mechanical seals
-Temperature to 190°F (90°C)
-Low disposal cost
-Choice of cellulose, carbon/cellulose or reusable polypropylene filter media
-Powder coated steel frame with casters for easy handling
-NEMA 4 water tight, corrosion resistant starter
-Mechanical cover lifting device for easy access to filter pack
-Bottom plate and lifting rod for quick change of disc stack standard (optional for 4500)
Filter chambers are constructed of mild steel with hard rubber lining (3 mm) on the interior and corrosion resistant paint (2 coats) on the exterior. A flanged tangential inlet is standard, along with a bottom outlet and drain. Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. The lifting device provides for mechanical movement of the cover for maintenance purposes. An air release valve positioned on the cover, is also used as the return line during pre-coating. A pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard. Filter media suited for the application is placed between the rigid polypropylene filter discs. Filter media of various materials and micron ratings are available. Ten (10) micron cellulose is standard. All systems are mounted on a powder coated structural steel frame with casters for easy handling.
Model 9000-HF through 30000-HFD
Fybroc fiberglass centrifugal pumps are standard. Mechanical seal options are single CRS-35/B with silicon carbide faces or double waterflush.
Slurry tanks are mild steel construction with an interior of hard rubber (3 mm) and an exterior of corrosion resistant paint (2 coats). They are used to facilitate pre-coating and addition of activated carbon (if required), as well as solution make-up and priming of the pump. The slurry tank can also be used to store solution from the fitter chamber during changing of media or maintenance. Pre-coating provides superior filtration and extends the life of the filter media.
Piping, Valves and Connections
Piping, valves, and connections are all CPVC construction. Suction of the pump is piped to permit flow from the solution tank, slurry tank, and the filter chamber.
X-Construction (Contact Us for additional price adder)
X-construction is used for more aggressive solutions such as acid copper, acid zinc, and acid tin. The filter chamber and slurry tank are outside rubber lined, the base and cover are powder coated and the pump shaft is titanium.
VD Lid assembly (15000/30000 standard, 9000 optional)
VD Lid assembly is used to tighten down the disc stack versus the cover.
WE ALSO CARRY ALL MEFIAG SPARE PARTS AND FILTER PAPER / MEDIA
Click Here to Download: DATA SHEET (MEFIAG METPRO 15000-HF and 15000-HF-SY)
Note: All Filter units will have to ship by freight