|Parameter||Model # 0620|
|Filtering Capacity||1,200 GPH|
|Open Pumping Capacity||2,400 GPH|
|Filtration Surface Area (ft2)||12 sq. ft.|
|Number of Filter Media||35 pcs of 8-1/8" dia Media|
|Sludge Holding Capacity (in3)||225 Cubic Inches|
|Approx Dimension (in)||31" long x 16" wide x 43" high no slurry tank
40" long x 16" wide x 43" high with slurry tank
|Approx (Crated) Net Weight (lbs)||245 lbs no slurry tank
310 lbs with slurry tank
|Hose Connections||1-1/2" Suction and 1-1/4" Discharge|
|Hose Length (Total)||(2) – 10' each|
|Motor*||1 HP TEFC (See Pump Options)|
FEATURES AND BENEFITS
• All polypropylene construction withstands highly acidic environments
• Magnetic drive pump with silicone carbide bearings is standard
• “”Unitized Pack/Cover”” disc assembly
• Large sludge holding capacity
• Low disposal cost (100 GPH per sq/ft of surface area)
• High efficiency
• Pre-coated flow rate 1200 GPH
• Temperatures to 180°F(82°C)
• Specific gravities to 1.5
• Shipped ready for immediate operation
The filter chamber is constructed of all polypropylene with bottom inlet and top discharge. Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided. A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard. Base is polypropylene with stainless steel channel support structure and polypropylene feet. Casters are available upon request.
The disc assembly is all polypropylene. All filters discs are attached to the filter cover to allow easy removal for maintenance. The unique filter cover design on all models converts into a filter pack stand when pack is removed. Filter media selected for the application is placed between the rigid polypropylene discs. Ten (10) micron cellulose is standard. Carbon/cellulose (10 micron) and polypropylene of various densities are available.
Magnetic Drive Pump
A polypropylene, magnetic drive pump Model PM is furnished with a 1 HP TEFC motor. High purity silicon carbide bearings and viton o- rings are standard. The magnetic switch motor starter is housed in a liquid tight enclosure.
The slurry tank is all polypropylene construction and is furnished with Model PP-SY units. Slurry tanks are used to facilitate pre-coating, addition of carbon (if required), and solution make-up. These are sized to store the complete capacity of the filter chamber during changing of the media or maintenance.
Piping, Valves and Connections
Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.
-Granular carbon treatment kits
– Single seal polypropylene pump
-Self-priming magnetic drive pump
WE ALSO CARRY ALL MEFIAG SPARE PARTS AND FILTER PAPER / MEDIA
Click Here to Download:
DATA SHEET (MEFIAG METPRO 0620-PP and 0620-PP-SY)
Note: All Filter units will have to ship by freight
There are no reviews yet.