Description
| Parameter | Model # 4500 |
|---|---|
| Filtering Capacity | 4500 GPH |
| Open Pumping Capacity | 7200 GPH |
| Filtration Surface Area (ft2) | 44 sq. ft. |
| Number of Filter Media | 45 pcs of 14" dia Media |
| Sludge Holding Capacity (ft3) | 0.85 Cubic Ft |
| Approx Dimension (in) | 30" long x 24" wide x 50" high no slurry tank 41" long x 30" wide x 50" high with slurry tank |
| Approx (Crated) Net Weight (lbs) | 600 lbs no slurry tank 720 lbs with slurry tank |
| Hose Connections | 2" NPT (Female) Suction and 1.5" (Female) Discharge |
| Motor* | 3 HP TEFC |
Note: CRS Pump with Mechanical Seal is Standard, Contact us for Magnetic Drive Pump Options
FEATURES & BENEFITS:
–Flow rate 4,500 GPH
-Horizontal disc technology
-Maximum surface area (1 sq. ft. per 100 GPH!)
-Large sludge holding capacity
-Superior corrosion resistance
-FRP pump with choice of mechanical seals
-Temperature to 190°F (90°C)
-Low disposal cost
-Choice of cellulose, carbon/cellulose or reusable polypropylene filter media
-Powder coated steel frame with casters for easy handling
-NEMA 4 water tight, corrosion resistant starter
-Mechanical cover lifting device for easy access to filter pack
-Bottom plate and lifting rod for quick change of disc stack standard (optional for 4500)
SPECIFICATIONS:
Filter
Filter chambers are constructed of mild steel with hard rubber lining (3 mm) on the interior and corrosion resistant paint (2 coats) on the exterior. A flanged tangential inlet is standard, along with a bottom outlet and drain. Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. The lifting device provides for mechanical movement of the cover for maintenance purposes. An air release valve positioned on the cover, is also used as the return line during pre-coating. A pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard. Filter media suited for the application is placed between the rigid polypropylene filter discs. Filter media of various materials and micron ratings are available. Ten (10) micron cellulose is standard. All systems are mounted on a powder coated structural steel frame with casters for easy handling.
Pump
Model 4500-HF
Mefiag polypropylene centrifugal pumps are standard with a stainless steel pump shaft. Mechanical seal is CRS-25/B with silicon carbide faces.
Slurry Tank
Slurry tanks are mild steel construction with an interior of hard rubber (3 mm) and an exterior of corrosion resistant paint (2 coats). They are used to facilitate pre-coating and addition of activated carbon (if required), as well as solution make-up and priming of the pump. The slurry tank can also be used to store solution from the fitter chamber during changing of media or maintenance. Pre-coating provides superior filtration and extends the life of the filter media.
Piping, Valves and Connections
Piping, valves, and connections are all CPVC construction. Suction of the pump is piped to permit flow from the solution tank, slurry tank, and the filter chamber.
X-Construction (Contact Us for additional price adder)
X-construction is used for more aggressive solutions such as acid copper, acid zinc, and acid tin. The filter chamber and slurry tank are outside rubber lined, the base and cover are powder coated and the pump shaft is titanium.
WE ALSO CARRY ALL MEFIAG SPARE PARTS AND FILTER PAPER / MEDIA
Click Here to Download:
DATA SHEET
Note: All Filter units will have to ship by freight
Reviews
There are no reviews yet.