(800) 432-8692 | (305) 681-8531

6500-LS and 6500-LS-SY, Horizontal Disc Filtration System Rubber Lined


Pump Options *

Slurry Tank option *

Specify System Parameters *

SKU: 6500-LS Category:


Parameter Model # 6500
Filtering Capacity 6500 GPH
Open Pumping Capacity 7200 GPH
Filtration Surface Area (ft2) 62 sq. ft.
Number of Filter Media 35 pcs of 19" dia Media
Sludge Holding Capacity (ft3) 2.63 Cubic Ft
Approx Dimension (in) 39" long x 32" wide x 53" high no slurry tank
53" long x 39" wide x 53" high with slurry tank
Approx (Crated) Net Weight (lbs) 975 lbs no slurry tank
1250 lbs with slurry tank
Hose Connections 2-1/2" Suction and 2" Discharge
Hose Length (Total) 10'
Motor* 3 HP TEFC

Note: CRS Pump with Mechanical Seal is Standard, Contact us for Magnetic Drive Pump Options


-Horizontal disc technology for greater surface area and maximum efficiency.
-Large sludge holding capacity
-Low disposal cost.
-Wider range of flow rates for optimum bath turnover rates.
-Corrosion resistant construction for use in most severe applications.
-Temperatures to 190°F(90°C).
-Mechanical lifting device for easy access to filter pack.
-All polypropylene pump.
-CRS mechanical seal with silicon carbide faces.
-Powder coated steel frame with casters for easy handling.
-Choice of cellulose, carbon/cellulose, and reusable polypropylene media.
-NEMA 4 water tight, corrosion resistant starter.
-Optional lifting device for easy pack removal

Filter chambers are constructed of mild steel with hard rubber lining (3 mm) on the interior and corrosion resistant paint (2 coats) on the exterior. A flanged tangential inlet is standard, along with a bottom outlet and drain. Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. The lifting device provides for mechanical movement of the cover for maintenance purposes. A pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard. Filter media suited for the application is placed between the rigid polypropylene filter discs. Filter media of various materials and micron ratings are available. Ten (10) micron cellulose is standard. All systems are mounted on a powder coated structural steel frame with casters for easy handling.

Polypropylene centrifugal pumps are equipped with TEFC, flange mounted motors. Mechanical seal is MEFIAG CRS25/B with silicon carbide faces. Pump shaft is stainless steel. The motor starter is mounted in corrosion resistant, water tight NEMA 4 enclosure.

Slurry Tank
Slurry tanks are mild steel construction with an interior of hard rubber (3 mm) and an exterior of corrosion resistant paint (2 coats). They are used to facilitate pre-coating and addition of activated carbon (if required), as well as solution make-up and priming of the pump. The slurry tank can also be used to store solution from the filter chamber during changing of media or maintenance. Pre-coating provides superior filtration and extends the life of the filter media.

Piping, Valves and Connections
Piping, valves, and connections are all CPVC construction. Suction of the pump is piped to permit flow from the solution tank, slurry tank, and the filter chamber.

X-Construction (Contact Us for additional price adder)
X-construction is used for more aggressive solutions such as acid copper, acid zinc, and acid tin. The filter chamber and slurry tank are outside rubber lined, the base and cover are powder coated and the pump shaft is titanium.

VD Lid Assembly (6500/13000 Optional)
VD lid assembly is used to tighten down the disc stack verses the cover.


Click Here to Download:

Note: All Filter units will have to ship by freight

Additional information

Weight 1300 lbs


There are no reviews yet.

Be the first to review “6500-LS and 6500-LS-SY, Horizontal Disc Filtration System Rubber Lined”

Your email address will not be published. Required fields are marked *