Get Accurate Plating Thickness Controll!
The ATC-7000 process controller provides exact, repeatable plating. This microprocessor-based instrument provides plating thickness control and a display of accumulated ampere-time.
The ATC-7000 is equipped with a battery back-up to maintain the totalizer memory in the event of a power interruption. In addition, it is designed such that the NEMA 4X cabinet never needs to be opened. All settings can be made from the front panel.
How It Works
- Plating Thickness Control: By presetting the number of ampere-minutes (or hours) desired using the touch panel, the unit will count down to zero and an alarm will sound. Or, the ATC-7000 can be programmed to shut off the rectifier at the end of the plating cycle, and restart it by pressing “RESET”.
- Accumulated Ampere Time: At any time, the user can view accumulating ampere-time by pressing the “TOTALIZER” button.
- System Set-Up: By entering the four-digit numerical password, the user can: clear the totalizer; calibrate the ATC-7000 for amp-hours or amp-minutes, and/or recalibrate the unit. This feature allows all critical parameters to be kept under “Lock and Key,” protecting the totalizer form unintentional clearing of accumulated data.
Accuracy: 0.5% of set-point (1-100mv)
AC Input: 115V, 50/60 Hz
Ampere-time: Amp-minutes to amp-hours
Dimensions: 6-1/4”L x 6-1/4”W x 4-1/2”H